The Dracom 806DM Video Demodulator is a
professional quality agile television demodulator that provides
an audio and video output from any VHF, UHF, or CATV channels
(54 through 806 MHz). The standard one rack-unit design permits
convenient paring with a Drake or Dracom Professional Video Modulator
to perform off-air or CATV channel processing.
| You may download the owners manual in Adobe® Acrobat® format by clicking here. | |
| If you don't have the Adobe® Acrobat® Reader, click here. |
 |
| RF | |
|
Input Frequency |
54 through 806 MHz, Off-Air channels 2 through 69, CATV channels 2 through 125. |
|
Input Level: |
-10 to +35 dBmV |
|
Noise Figure: |
10 dB maximum |
|
Image Rejection: |
50 dB minimum |
|
Input Impedance: |
75 Ohms |
| Video | |
|
Output Level: |
1.0 Vp-p nominal, NTSC standard negative sync, adjustable with front panel control. |
|
Output Impedance: |
75 Ohms |
| Audio | |
|
Output Level: |
350 mV rms nominal, adjustable, unbalanced |
|
Output Impedance: |
600 Ohms nominal |
| General | |
|
Power Requirements: |
115 VAC ± 10%, 60 Hz, 5 watts |
|
Operating Temperature: |
0° to 50° Celsius, ambient. |
|
Dimensions: |
1.75 inches Height x 19 inches Width x 4 inches Depth |
|
Weight: |
4.5 lbs. |
|
Connectors: |
RF input, video output, and unbalanced audio output are all type "F". Use adapter for RCA phono. |
|
|
230 Industrial Drive Franklin, OH 45005 U.S.A. |
Fax: 937-806-1510 Parts & Service: 937-746-6990 In Canada: 705-742-3122 |
