The Drake HCP1550 is a high quality, frequency agile channel processor capable of converting any VHF, UHF, or CATV input signal to any standard output channel between 54 through 550 MHz. Input and output frequency, including output frequency offset, are easily set with front panel push wheel switches. A/V ratio and output controls are also provided along with IF loop-through connections to offer exceptional flexibility.
|
You may download the owners manual in Adobe® Reader format
by clicking here. You may download information on the "T" channel option by clicking here. |
|
| If you don't have the Adobe® Reader, click here. |
 |
| Input Section | |
| Frequency Coverage: |
54 through 806 MHz Off-air TV channels 2 through 69, Standard CATV channels 2 through 125, IRC and HRC channels 1 through 125 (Channels T7 - T14 with "T" channel upconverter option) |
| Frequency Selection: | Selectable by front panel push wheel switches |
| Input Impedance: | 75 Ohms |
| RF Input Level: | -10 dBmV to +35 dBmV |
| Noise Figure: |
VHF: 8 dB UHF: 10 dB |
| Tuner Image Rejection: |
VHF: 65 dB UHF: 50 dB |
| Output Section | |
| Frequency Coverage: |
82 channels, 54 through 550 MHz; Channels 2 through 78 and 95 through 99 |
| Output Level: | +60 dBmV (typically adjustable from +50 to +60 dBmV) |
| Video Frequency Response: | 20 Hz to 4.2 MHz, ± 3 dB |
| L-C Delay: | ± 50 nanoseconds |
| Frequency Stability: | ± 5 PPM of frequency difference between input and output signals |
| FCC Offset: | Selectable: None or in increments of 6.25 kHz, plus or minus up to 56.25 kHz maximum offset |
| A/V Ratio Adjustment: | 0 to -10 dB relative to input A/V ratio |
| Spurious Outputs: | -58 dBc minimum, -60 dBc typical (measured at an input level of between 0 to +20 dBmV) |
| Broadband Noise: | -75 dBc typical, (4MHz noise bandwidth @ ± 12 MHz) |
| General | |
| Power Requirements: | 115 VAC (± 10%) 60 Hz, 30 watts |
| Operating Temperature: | 0° to +50° Celsius (32° to 122° Fahrenheit), ambient |
| Dimensions: | 1.75 inches (45 mm) Height x 19 inches (483 mm) Width x 8.75 inches (222 mm) Depth |
| Weight: | 7.0 lbs. (3.2 kg.) |
|
|
R.L. Drake, LLC |
Sales: 937-746-4556 |
