
Providing economical multiplex
of two ATSC format streams from dual ASI inputs.
High performance QAM modulator
with 61 dBmV low noise agile upconverter.
The R. L. Drake model MQM1000 is a professional
quality, digital headend transcoder that accepts one or two MPEG2
digital inputs via two Asynchronous Serial Input (ASI) connectors.
These signals must be ATSC compatible streams if multiplexing
is to be performed and usually will have originated from a local
TV broadcast station and may have been transported over fiber
links to the MQM1000. After multiplexing and null packet management,
the MQM1000 QAM modulates and up converts onto any desired CATV
or off-air output channel between 54 and 1002 MHz. The MQM1000
can also operate as a non-multiplexing QAM modulator when a single
ASI input is selected.
| You may download the owners manual in Adobe® PDF format by clicking here. | |
| If you don't have the Adobe® Reader, click here. |
|
|
ASI Inputs |
|
|
Inputs: |
Two DVB Asynchronous Serial Inputs
(ASI). |
|
QAM Modulator |
|
|
Modulation Modes: |
16QAM, 32QAM, 64QAM, 128QAM, 256QAM,
512QAM or 1024QAM. |
|
Symbol Rate: |
1 Ms/s to 7 Ms/s. |
|
Forward Error Correction (FEC): |
ITU-A (DVB) or ITU-B (DigiCipher® II). |
|
I/Q Phase Error: |
Less than 1 degree. |
|
Carrier Suppression: |
45 dB. |
|
Channel Amplitude Error: |
Less than 1dB. |
|
MER: |
Greater than 38 dB with blind equalizer. |
|
Null Packet Processing |
Available in the fixed output clock mode. |
|
Analog EAS IF Input |
|
|
Operating Input Level: |
+30 dBmV ±5 dB @ 45.75 MHz. 75 ohms. |
|
Auto Switching Level: |
+20 dBmV minimum. |
|
Upconverter RF Output |
|
|
Output Frequency Range: |
54 MHz to 1002 MHz. |
|
Channel Plan: |
Standard CATV, HRC, IRC or Broadcast. |
|
Frequency Stability: |
±5 ppm. |
|
Maximum Output Level: |
+61 dBmV minimum, adjustable downward. |
|
Minimum Output Level: |
+45 dBmV. |
|
Output Level Accuracy: |
±1 dB. |
|
Output Impedance: |
75 Ohms with return loss better than 14 dB (within output filter passband). |
|
Spurious Outputs: |
-60 dBc from 40 MHz to 1000 MHz. |
|
Broadband Noise: |
Less than -12 dBmV (6 MHz bandwidth @ ±12 MHz). |
|
Phase Noise: |
-101 dBc @ 10 kHz offset. |
|
RS232 Control |
|
|
Data Link: |
2400, 4800, 9600, or 19,200 baud interface via serial cable. |
|
RS232 Input: |
DB9 connector for connection to modem, PC, or Drake SCTeci ethernet controller. |
|
RS232 Output: |
DB9 connector for connection to additional units. |
|
General |
|
|
Power: |
90-132 VAC, 60 Hz, 40 W maximum |
|
Weight: |
7 lbs. (3.2 Kg.) |
|
Size: |
19" (48.3 cm) W x 1.75" (4.45 cm) H x 11.5" (29.2 cm) D |
|
Operating Temperature: |
0º C (32º F) to 50º C (122º F) |
|
R.L. Drake, LLC |
Sales: 937-746-4556 |