VMM860AG Agile Video Modulator
VMM860AG Agile Video Modulator |
|
The VMM860AG is an agile, high quality, vestigial sideband, heterodyne audio/video modulator with synthesized visual and aural carriers. One to twelve modulators or other accessories can be mounted in the same amount of rack space typically required for two standard size units. Ideally suited for private cable, hotels and motels, institutional, and SMATV applications, the VMM860AG accepts video and audio baseband signals from a satellite receiver, TV camera, videotape recorder, TV demodulator, or similar signal sources.
You may download the owners manual in Adobe®format by clicking here. |
|
| If you don't have the Adobe® Reader, click here. |
|
| RF | |
| Frequency Range: | Agile, 54 through 860 MHz. |
| Frequency Selection: |
Standard CATV Channels 2 through
135 HRC and IRC options available by moving an internal jumper. Broadcast TV Channels 2 through 69 |
| Output Level: | +45dBmV minimum, typically adjustable from +35 to +45 dBmV |
| Output Impedance: | 75 Ohms, return loss typically 8 dB |
| A/V Ratio: | Audio Carrier -22 to -12 dB, referenced to video carrier, adjustable |
| Frequency Stability: | ± 5 KHz |
| Intercarrier Frequency: | 4.5 MHz |
| FCC Frequency Offsets: | Automatic (+12.5 KHz, +25 KHz, or none as required for each channel) |
| Spurious Outputs (5-1000 MHz): | -60 dBc, measured at -15 dB A/V ratio and with modulator output level of +45 dBmV |
| In Channel C/N: | 65 dB typical, 4MHz bandwidth |
| Broadband Noise: | -78 dBc typical, 4 MHz bandwidth @ 45 dBmV output |
| Video | |
| Input Level for 87.5% modulation: | 0.65 Vp-p to 1.5 Vp-p, manual gain adjustable with front panel control |
| Input Impedance: | 75 Ohms, return loss of 26 dB minimum |
| Frequency Response: | 20 Hz to 4.2 MHz, ± 1 dB |
| C/L Delay: |
within 50 nSec. of 0 nSec. (standard) F.C.C. predistortion available by special order. |
| Differential Gain: | ± 3% (10 to 90% APL) |
| Differential Phase: | ± 3 degrees (10 to 90% APL) |
| Audio | |
| Input Level for 25 kHz Peak Deviation: | 125 mVrms to 2.5 Vrms. Manual gain adjustment with front panel control |
| Input Impedance: | >10K Ohms, unbalanced |
| Pre-emphasis: | 75 µ Seconds (Defeatable via rear panel switch for BTSC baseband stereo compatibility) |
| Frequency Response: |
40 Hz to 15 kHz, ± 1
dB referenced to 75 µ second pre-emphasis curve. 40 Hz to 100 kHz, ± 0.5 dB if pre-emphasis is defeated. |
| Signal to Noise Ratio: | 65 dB |
| Total Harmonic Distortion: | 1.0% maximum |
| General | |
| DC Power Input: | +12 VDC @ 200 mA, +5 VDC @ 350 mA |
| Operating Temperature: | 0° to 50° Celsius (32° to 122° Fahrenheit), ambient. |
| Dimensions: | 3.5 inches (89 mm) Height x 1 inch (25 mm) Width x 7.5 inches (191 mm) Depth (not including handle or connectors) |
| Weight: | 12 ounces (0.34 kg.) |
|
|
R.L. Drake, LLC |
Sales: 937-746-4556 |
